4th Workshop for International Standardization of
Diamond-like Carbon Coatings

トップページへ戻る

• Nov. 19, 2010
• Collaboration Room in West Bldg. 9, Tokyo Institute of Technology O-okayama, Meguro-ku, Tokyo, JAPAN

Scope:

For the last decades, diamond-like carbon (DLC) coating has been industrialized in wide range of industry from machining tools, data storage, automobile components to biomedical implants. As this variety of application is based on the tunable properties of the DLC coatings, it has become extremely important to establish the standard or classification of the DLC coatings for further promotion in the industrial applications. Encouraged by the pioneering works in Germany, Korea and Japan, a lot of efforts have been continuing to achieve international cooperation for standardization of diamond-like carbon coatings.

This workshop follows previous workshops held 2008 in Korea, 2009 in Japan and 2010 in Germany.

This workshop focus on the following issues.

1. Review of the present status of DLC standardization in developed countries
2. Survey of the requirements in industry (Automobile, Electronics, Machining tools, Machine parts, etc.)
3. Identification of the key parameters for the classification of DLC coating
4. Specification of the characterization method for the classification of DLC coating
5. Industrial guideline for the supply of DLC coating
6. How to keep secret in specific technology for successful worldwide round robin test

Chairperson:

Prof. Hidetoshi SAITO, Nagaoka University of Technology

Secretary

Dr. Atsushi Hirata, Tokyo Institute of Technology, Japan

Organizing committee:

Dr. Naoto Ohtake, Tokyo Institute of Technology, Japan

Dr. Tsuguyori Ohana, AIST, Japan

Mr. Masanori Tsujioka, Nippon ITF Inc., Japan

Dr. Masahiro Suzuki, JTEKTCo., Japan

Dr. Makoto Kano, Kanagawa Indus. Technol. Center

Mr. Masanori Hiratsuka, Nanotec Co., Japan

Dr. Hiroshi Inaba, Hitachi, Ltd., Japan

Dr. Naruhiko Fujimaki, SGS Japan Inc., Japan

Dr. Akihiro Tanaka, Japan New Diamond Forum, Japan

Notice:

This workshop is organized as an activity in the investigation program entrusted by NEDO, thus, the registration fee is free of charge for all participants excluding the handout (￥2,000).

Program
　International Session: Chair: Dr. Ohana (AIST)

10:00-10:30 Plenary talk

Worldwide standardization activities on diamond-like carbon

Prof. Hidetoshi Saito (Nagaoka University of Technnology)

 

10:30-11:00 Invited talk

Application of DLC Films on Soft Polymers for Surface Nanostructuring

Dr. Myoung-Woon Moon and Dr. Kwang-Ryeol Lee (Korea Institute of Science and Technology)

 

11:00-12:30 Poster exhibition

 

P1: Textured DLC films on three-dimensional substrate

Mai Takashima, Kei Kanzawa, Shin Matsuo, Makoto Matsuo, Yoshinao Iwamoto and Naoto Ohtake (Tokyo Institute of Technology)

 

P2: Comparison of protein adsorption ability to hydrogenated amorphous carbon film surface

A. Takeda, S. Ohshio, H. Akasaka, H. Saitoh (Nagaoka University of Technology)

 

P3: Synthesis of deuterated amorphous carbon films by reactive sputtering deposition from graphite target and deuterium gas

K. Mizuguchi, T. Suzuki, H. Akasaka, S. Ohshio, H. Saitoh (Nagaoka University of Technology)

 

P4: Evaluation of chemical damage on amorphous carbon film surface using SPR phenomenon

Y. Sasaki, K. Ii, A. Takeda, S. Ohshio, H. Akasaka and H. Saitoh (Nagaoka University of Technology)

 

P5: Rapid Synthesis of Diamond-like Carbon Films at Subatmospheric Pressure by Nanopulse Plasma CVD

Nao Miyatake and Naoto Ohtake (Tokyo Institute of Technology)

 

P6: Near-Edge X-ray Absorption Fine Structure Spectra of Si-containing DLC Thin Films

Kazuhiro Kanda¹, Masahito Niibe¹, Akira Wada², Haruhiko Itoh², Tsuneo Suzuki³, and Hidetoshi Saitoh² (1 Laboratory of Advanced Science and Technology for Industry, University of Hyogo) (2 Department of Materials Science and Technology, Nagaoka University of Technology) (3 Extreme Energy-Density Research Institute, Nagaoka University of Technology)

 

P7: Near edge X-ray absorption fine structure measurements of DLC and a-SiCx:H films

Akira Wada¹, Takeshi Ogaki¹, Tomoyuki Yasukawa³, Fumio Mizutani³, Masahito Tagawa⁴, Tsuneo Suzuki⁵, Masahito Niibe², Hidetoshi Saitoh¹, Kazuhiro Kanda², and Haruhiko Ito1 (1 Department of Materials Science and Technology, Nagaoka University of Technology) (2 Laboratory of Advanced Science and Technology for Industry, University of Hyogo) (3 Graduate School of Material Science, University of Hyogo) (4 Department of Mechanical Engineering, Faculty of Engineering, Kobe University) (5 Extreme Energy-Density Research Institute, Nagaoka University of Technology)

 

P8: Applications of DLC Classification for Industry

Masanori Hiratsuka, Akiyoshi Azuma, Takeo Imai, Hideki Nakamori (Nanotec Corporation)

 

P9: Development of inquiry system for applications of amorphous carbon coating

Yasuharu Ohgoe¹, Kenji Hirakuri¹, Ayako Katoh², Taichi Kanai¹, Akio Funakubo¹, Yasuhiro Fukui¹ (1 Tokyo Denki University) (2 Saitama Medical University)

 

P10: A Study on the Effect of Sublimation Sources on the Properties of Amorphous Carbon Films Deposited in Electron Beam Excited Plasma

Hamed Vaez Taghavi and Atsushi Hirata (Tokyo Institute of Technology)

 

(Lunch Break)

（国内参加者向けセッション）
（Domestic Oriented Session）

ショートコース： DLC規格化に向けた日本におけるDLCの構造評価および分類
Short Course: Characterization and Classification of DLC in Japan toward DLC Standardization